Core calculation
Units & reference conditions
Change units on one basis, or explicitly convert a dry-air state.
Start calculationTools & Sizing
Define a requirement, calculate with traceable inputs and prepare a supplier RFQ.
New projects stay in memory until you choose Save or Export. Local saving is not a cloud account. Contacts are excluded from saved project files.
Calculations run on this device. A result is a preliminary estimate, not engineering approval. No documented model operating points have been imported yet.
Core calculation
Air demand & compressor screening
Separate average, sustained and peak demand; prepare a traceable specification.
Start calculationCore calculation
Compressor requirement check
Use the shared demand model and check documented operating points.
Start calculationCore calculation
Refrigerated dryer
Use a sourced or explicitly user-provided correction factor.
Start calculationCore calculation
Air receiver
Estimate peak buffering or a simple switching cycle separately.
Start calculationCore calculation
Single-run pipe pressure loss
Use actual internal diameter and sourced material / fitting inputs.
Start calculationCore calculation
Running cost & payback
Calculate from package electrical input and explicit operating states.
Start calculationExtended calculation
Desiccant dryer & purge
Record the regeneration route and precise purge definition.
Start calculationExtended calculation
Nitrogen feed-air requirements
A sourced air-to-gas ratio must match purity and operating conditions.
Start calculationExtended calculation
Leakage estimate
Use an isolated, no-demand pressure decay test or measured flow.
Start calculationExtended calculation
Ventilation & cooling balance
Enter actual room heat or cooling load and sourced fluid properties.
Start calculationExtended calculation
Useful heat recovery
Check simultaneous heat demand and compatible temperatures.
Start calculationRequirement helper
Portable compressors and air tools
Build a documented tool schedule and site requirement for portable supply. Carry demand and hose details into the air-demand and pipe-loss tools.
Define requirementsRequirement helper
Airends and dedicated parts
Prepare a traceable replacement inquiry using package identity, original part details and the interfaces that need checking.
Define requirementsRequirement helper
Compressor lubricant requirements
Record the current oil, equipment requirements and changeover context for a document-based compatibility review.
Define requirementsRequirement helper
Motors and drives
Compile the electrical, mechanical, thermal and control requirements for a matched motor/drive configuration review.
Define requirementsRequirement helper
Controls and instruments
Define the existing device, protocol and specific functions before comparing replacement controllers, sensors or communication modules.
Define requirementsRequirement helper
Valves and pneumatics
Collect medium, operating limits, flow and actuation requirements. Optional cylinder dimensions remain requirements until a supported method and compatible product data exist.
Define requirementsRequirement helper
Seals and transmission
Identify the original component, dimensions and service conditions for a supported replacement review.
Define requirementsRequirement helper
Adsorbent replacement requirements
Collect the equipment and original material specification before discussing compatible replacement material or purchasing quantity.
Define requirementsRequirement helper
Boosters and special compression
Create an engineering RFQ for a specified gas and duty. Keep it separate from ordinary dry-air compressor screening.
Define requirementsRequirement helper
Low-pressure blowers and vacuum
Define a blower or vacuum duty independently, retaining absolute-pressure or pressure-difference definitions and the actual gas-flow basis.
Define requirementsRequirement helper
Filtration and air-quality requirements
Define measurable point-of-use targets, or record the targets that still need agreement. Identify treatment stages and documentation for supplier review.
Define requirementsRequirement helper
Industrial oxygen requirements
Prepare a complete industrial requirement sheet and identify the proposed generation process. PSA, VSA and VPSA require their own equipment and energy data.
Define requirementsRequirement helper
Condensate and drain requirements
Collect intake and stage conditions for a drain and oil-water separator inquiry. Numeric moisture-removal output is disabled until its property method is independently validated.
Define requirements